|
2017 Lastest 220V Advertising Barrier For Car Parking Lot
Working voltage | 220V+10%/50HZ |
Motor Power | 140W |
Working temperature | -30℃~80℃ |
Relative humidity | ≤95% |
Length of boom arm | Customized depend on demands |
Arm plate number | Depends on the boom length |
Advertising plate size | 82x830mm |
Screen size boxes | 450x880mm |
LED light power | 16.7A,200 W |
Barrier height after the lift | Depending on the arm length |
Working speed | Generally for 5 seconds(Special requirements can be customized) |
The arm center height | 1050mm |
Remote distance | ≤30m |
Input interface | +12 Level signal or pulse signal is greater than 100ms,the derive current of less than 10mA |
Size | 450mmX 360mmX1180mm |
Advertising Barrier Features
1.1 Advertising barrier’s house is durable and water-proof, so it
can be used outdoor.
1. 2 Appearance is simple and generous with advertising lamp house
And advertising board. Advertising board can be dismantled, and
easy to change advertising photo, All operation is simple.
1.3 Both barrier housing and arm plate are equipped with LED
lights, the LED lights can be controller via timer(it can be set
like this: close in day time and open at night).
1.4 Combination of lights, electricity and mechanical control.
Operation is flexible and convenient. Safe and reliable in use
1.5. Multiplex control way are provided for user: push button,
remote controller, long range reader etc.
1.6. Adopt multiple protective measures (like anti-wind, preventing
motor overheat, Anti-surge, Thunder-proof and so on),which increase
barrier’s safety and reliability.
1.7. Add loop sensor, following functions can be realized: auto
close, auto bounce up etc.It can automatic closing gate and perfect
preventing smashing car.
1.9. System adopts standard electric interface which can connect
with other system easily.
1.10. Barrier is adjusted to prefect conditions before leaving
factory: it is stable, lower noise, long service life.
Advertising Barrier Security Features
2.1. Pressure sensor: During closing, arm will auto bounce back if
it meets any resistance
to reduce damage(pressure sensor is with function of
anti-collision).
2.2.Loop sensor: Arm will open automatically during closing If
controller gets signal from
the sensor. Barrier cannot be closed till loop sensor trigger
signal off. And loop sensor
will close barrier automatically after signal.
2.3. Open first function: No matter what barrier arm status is,
gate will carry out open
order at once when open signal is got.
2.4. Protective rubber: Rubber is fix at the arm bottom. It can
minus damages if any
accident happens.
![]() |
220V Residential Automatic Gates For Advertising , Security Gates For Parking Lots Images |