Rfid straight automatic barrier gate for road safety parking system
Car Parking Barrier Gate Specifications
1) Power Supply : AC220V(Standard )
2) Motor : AC motor
3) Railing speed: 1saa6s (adjustable)
>4) >Arm Length :1-6 m (optional)
>5) >Arm type:straight arm ,telescopic arm ,folding arm ,fence arm is
>6) >Part optional :loop detector ,card reader ..
Car Parking Barrier Gate Function of Straight Boom Barrier Gate
1. Barrier gate arm can be chosen from 1m to 6m,open or close time
from 1.5s to 6 s .
2. The driving mechanism has the desiging of intelligent
overheating protection system, in frequent use, it can control the
warming of the motor, makes the motor not burned easily.
3. The main engine adopts mechanical limit switch and photoelectric
limit switch dual protection, to avoid the problems caused by using
traditional magnetic switch which is easily interfered by the
4. Special low-speed aluminum housing motor integrated gearbox
design, low noise, fast heat-dissipation.
5.The brarrier arm is 90 degrees running which excluding the
failure caused 360 degrees running.
6. It is running without arm-shaking.
7. Special balancing structure design makes the barrier arm has the
feature of slow-starting, fast-running, slow-stopping.
8. Special driving structure, no gears, non-belt
driving,maintenance free, high stability, longer life.
Car Parking Barrier Gate Features
Fast speed barrier gate for toll way or super highway.
The appearance of the products is attractive, after special
spraying treatment, the surface is full of modern taste. The
structure of the products is light and compact, waterproof and
These products are a combination of mechanism, photoelectric and
electricity control, easy to operate with safe and reliable.
The system has auto extreme position locking function or manual
rail-lifting alarm function (optional).
Whole circuit system without connecting points control, ensuring
the working of whole system safe and stable.
With a variety of control mode, the system can either be manually
controlled by manual button and remote controller, or
auto-controlled by vehicle detector, and can also be remote
controlled and managed by 485electrical interface.
Rail lifting times record: in the course of running, the system
will remember the times of rail lifting ordered by rail-hold
controller, then the rail will be hold open until the sensing times
of vehicle passing detected by vehicle detector is equal to the
times of rail lifting ordered by rail-hold controller.
Manual rail lifting: in case of power failure, then push the rail
up by hand directly.
Bump-proof: Rails shorter than 4 meters have this function and is
optional. When vehicle intrudes in by force, the rail will break
away from the machine rapidly under large outside force, so as to
protect the machine and the rail.
Car Parking Barrier Gate Technical
Power Supply: AC220V
Railing speed: 1.5s~6s (adjustable)
Working Environment Temp.: -40~ +85degree
Relative Humidity: <95% without dew
Communication interface: RS485 electrical standard, distance of
Type of rail: Straight /Fence /Folding arm
|Type||Opening and closing times||Maximum boom length|
Any question please feel free to contact Rebecca ,I will always
support you from 6:30 to 23:30 ( Beijing time )if you need help
.Rebecca ' s whatsapp / wechat :0086 13528448929.I will reply as
soon as possible (always within 5 mins)