Ac Motor Folding Arm Parking Lot Barrier Gate For Access Control
1. ST600 barrier gate use 80W turbine worm transmission
2. ST600 barrier gate AC motor,can easily lift up even with
additional signage installed on to the barrier arm,AC motor is
maintenance free.as there is no carbon in the AC motor,Built in
intelligent fan to cool the motor during heavy usage.
3. Housing is made with 2.5mm thickness mild steel for extra
durability to support longer arm.Housing body is coated with epoxy
paint for weatherproof protection
4. Uses smart motor counter to auto detect open/close position for
higher accunracy and better stability.No more mechanical wear and
tear which causes the arm to lifts up or down
5. Arm will swing out when hit directly bu vehicle (only straight
arm) to avoid further damage on the vehicle (optional)
ST-D107 2 Fence Arm Barrier Gate Parameters
Maximum straight boom length
Opening and closing times
Weight not including barrier boom
ST600 Parking Lot Barrier Gate Advantages
1. Limited Sensor
A. Improved NLSV2 design NLS V2 is using magnet sensor instead of
optical sensor.Optical sensor is subjected to interference from
ambient light level. New NLS design removed all blind spot area to achieve perfect opening and closing
B. Improved fix way NLS V2 fix magnet on initiative crank instead
of drive shaft. Optical sensor light plate will move during shaft
moving. New NLS design keeps magnet in initiative crank to achieve perfect open and stop position
2. DSP Dual Spring
A. Mechanism to achieve two times smoother arm motion. Combination
of different tension force reduced vibration as the arm stop. Well
balanced arm weight reduces the possibility of broken spring thus reducing down time.
B. Butterfly nut design makes changing spring tension easier.
3. DDS – Dual Detection Safety to achieve double safety. Innovative
design monitors current spike and motor rotation simultaneously to auto-reverse arm
if blocked by obstacle. This is a important safety feature to prevent further
damage in the event when arm hit car or pedestrian.
4. Improved air ventilation
A. New fan design located at top instead of sideways. This allowed
cool air enter from bottom and exit from top to achieve more
efficient cooling this enabling ST600 series to support higher flow of traffic.
B. Fan is controlled by function board instead of temperature
sensor. It can avoid thermal protection when temperature sensor is
broken. And It works during motor works and stops 5 minutes after motor stop.
5. Speed motor design
A. ST600 series barrier gates uses lowest possible rotation speed
(RPM) with our force rotation ratio technology to achieve high
speed opening. This reduces mechanical wear and effectively eliminates any maintenance servicing on the
B. 1.5s, 3s, 6s barrier use the same motor. It is easier to stock
motor for after sale service.
Communication with customers
Q: What's SHINING monthly production capacity for barrier gate?
A: 3000 Sets.
Q: As for the over-heating problem of barrier gate
A: SHINING barrier gate has motor cooling fan which can solve the
problem of over heating-protection. ,could working 24 hours without
stop: Drive Steady, Noise Lower, Structures Compact, can realize
Q: Sometimes, Why the barrier boom would open automatically?
A: Please check if the limit switch is on the right position; if
not, please adjust the Limit Switch. Please refer to last page of
Barrier Gate Manual. Or you can adjust the adjusting screw. And the
last step is to check the intensity of the spring.
Q: What’s the remote control distance?
A: In general, SHINING remote control can cover 100 meters, but it
is not safe and stable to control the barrier gate from 100 meters
away. SHINING recommends using the remote control within 30 meters.