Fingerprint Reader Tripod Turnstile Gate , Entrance Turnstile Gate
turnstile which widely used to integrate with magnetic cards,
barcode cards, ID or IC cards to manage the passages in hotel,
factories, communities and enterprises, etc.
1. Material:304 Stainless Steel
2. Single direction or bidirection
3. LED passing arrow can show direction to indicate passenger to
4. Stable running with little noise
5. Dynamic super bright LED display to show the direction
6. RS485 interfaces can connect turnstile with computer directly
7. Standard interfaces are convenient for connection with different
readers which can send relay signal
|Power Supply||AC220V±10V ,50Hz / AC110V±10V ,60Hz|
|Temperature||-30 to 60 degrees|
|Humidity||<95%, without concretion|
|Passing Speed||30 persons/min (normal open), 20 persons/min (normal close)|
|Arm Open/Close Time||2s|
|Input Interface||+12V electrical signal or impulse signal with width more than
|Communication Interface||RS485 (Distance: <=1200m)|
|Size||Uni-direction or Bi-direction|
Tripod Turnstile Gate Main Functions
1) Various working means can be set in the control panel menu,
namely:bi-direction card reading passing, or one direction card
reading passing and another passing limits, or one direction card
reading passing and another free passing, etc.
2) It is with RS485 connection for far control arm up and down to
satisfy the special needs or fire control requirements.
3) Running stable, little noise and no mechanical impact
4) Self-checking-power-on function, if power on, turnstile will
auto get to be held.
5) If power off, arm will fall automatically while power on later,
lift arms manually for semi-automation type. (And arm will be
automatically lift if power on for full-automation type.)
6) It is with standard electrical interface to connect various
kinds of readers and
writers for easy integration and also computer far control and
be realized by computer.
7) It will count the persons who have been passed through
automatically and will show the number by LED directly.
8) If working with software, the total-in-population can be set to
satisfy special request.
9) Passing direction will be shown by LED and passengers will know
which direction is allowed to pass.
10) Card reading memory or card reading without memory function can
be set in the control panel menu according to your request.
11) Re-position function. After card reading, if passenger not
through within the specific time, system will auto cancel passing
right for this time and the limit passing time length can be set.
The tripod turnstiles can be used in all places which need to
control people in and out.