120 degree double channesl automatic RFID access control full
|304# Stainless Steel (default), 201# or 316# Stainless Steel
|Thickness of ply:||1.7mm|
|Finish:||Brushed surface / Polished surface / Anti-Fingerprints surface|
|Shell’ size:||L2600mm*W1350mm*H2200mm (Standard)|
|The inductive card reader dimension:||equipped with the standard mounting brackets, or tailor.|
|Card Reader mounting:||Card readers may be mounted on the surface of the barrier, or the
card readers may be mounted flush mounted. There is an output to
interlock the card.|
|Operation voltage:||AC220V±10% 50Hz±10%|
|Time of opening / closing:||0.2s|
|Time to work after power on:||3s|
|Reset time after breaking down:||10s|
|Transit speed:||30 persons/minute|
|Communications Interface:||RS485, distance ≤1200m (standard) ; Available to connect with
external CAN BUS and Ethernet (Optional)|
|Input interface:||relay dry contact signal; +12V level signal or pulse width>100ms
12V pulse, drive current>10mA|
|Relative humidity:||≤90% Non-condensing|
|Working Environment:||-10℃ ~ 70℃, Indoor / Outdoor|
STANDARD FEATURES & FUNCTIONS:
The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader,consumption system, ESD
system and access control system etc, Rapid identification
technique, available to identify accurately and efficiently the
magnetic card, bar code card, ID/IC card etc.
Operation model: Both directions can be set as controlled mode or
free mode, two or one direction can be controlled by switch- button
or access controller.
Available with 4-arm, 90 degree spacing (default) or 3-arm, 120
degree spacing (optional).
The running status of device can be set up through pressing the
built-in small keyboard of the main control board.
When power off, the center rotor will be set free model (default)
or be locked model (optional).
Emergency-escape function: the center rotor will be set free
automatically by pressing the emergency button which can be
remote-controlled whether the power is on or not.
Reset automatically function: Go signal will be cancelled if
passage through is not completed within pre-set time. The standard
default is 10 seconds (time adjustable by changing parameter of
main control board).
Anti backup function: to prevent reverse rotation once the
mechanism has move 60 degree from home.
Remote control and management function: Through the management
computer to realize remote control and management.
○ Grit satin
○ Powder coated in colors
Guiding elements inside and outside
Light metal casting, natural anodized
Made of steel with space reserved for
● Push the arm to make turnstile
● 220V AC @ 60HZ
○ 230V AC @ 50HZ
○ 110V AC @ 60HZ
○ 220V AC @ 50HZ
Working power: 24V DC
● Relay signal