Half height prestige security bidirectional flap barrier gate
automation turnstile rfid
Flap turnstile has standard electrical interface which can be
connected with ID cards, IC cards,
magnetic cards, barcode cards etc. The integration system ensures
passing in order and will never
allow unauthorized persons to go in or go out.
1. Power Supply: AC220V±10V ,50Hz / AC110V±10V ,60Hz
2. Power Consumption: 100W/24V
3. Temperature: -15 to 60 degrees
4. Humidity: <95%, without concretion
5. Passage Width: 600mm
6. Passing Speed: 30 persons/min (normal open), 20 persons/min
7. Arm Open/Close Time: 1s
8. Input Interface: +12V electrical signal or impulse signal with
width more than 100ms, drive
9. Communication Interface: RS485 (Distance: <=1200m)
10. Material: Housing - 304 stainless steel Arm – Plexiglass
11. Housing Dimension: 1400*280*990mm
12. Arm Length: 260mm
13. Working Environment: Indoors or outdoors with shed
1. Problem-self-checking function.
2. Arm Turning: Bi-direction
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be
set in the control panel.
5. Auto-reposition function: After card read, passenger doesn’t
pass within regulated time, turnstile
will cancel order automatically. And the regulated time can be set
6. Anti-rush function: if there is no open single, arm will be
7. Stable running with little noise.